Synthesis of poly(isopropenylphenoxy propylene carbonate) and its facile side‐chain functionalization into hydroxy‐polyurethanes

4‐Isopropenyl phenol ( 4‐IPP ) is a versatile dual functional intermediate that can be prepared readily from bisphenol‐A ( BPA ). Through etherification with epichlorohydrin to the phenolic group of 4‐IPP , it can be converted into 4‐isopropenyl phenyl glycidyl ether ( IPGE ). On further reaction with carbon dioxide in the presence of tetra‐n‐butyl ammonium bromide ( TBAB ) as the catalyst, IPGE was transformed into 4‐isopropenylphenoxy propylene carbonate ( IPPC ) in 90% yield. Cationic polymerization of IPPC with strong acid such as trifluoromethanesulfonic acid or boron trifluoride diethyl etherate as the catalyst at ?40 °C gave a linear poly(isopropenylphenoxy propylene carbonate), poly( IPPC ), with multicyclic carbonate groups substituted uniformly at the side‐chains of the polymer. The cyclic carbonate groups of poly( IPPC ) were further reacted with different aliphatic amines and diamines resulting in formation of polymers with hydroxy‐polyurethane on side‐chains. Syntheses, characterizations of poly( IPPC ) and its conversion into hydroxy‐polyurethane crosslinked polymers were presented. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 802–808     

Side Information Generation Scheme Based on Coefficient Matrix Improvement Model in Transform Domain Distributed Video Coding

In order to effectively improve the quality of side information in distributed video coding, we propose a side information generation scheme based on a coefficient matrix improvement model. The discrete cosine transform coefficient bands of the Wyner–Ziv frame at the encoder side are divided into entropy coding coefficient bands and distributed video coding coefficient bands, and then the coefficients of entropy coding coefficient bands are sampled, which are divided into sampled coefficients and unsampled coefficients. For sampled coefficients, an adaptive arithmetic encoder is used for lossless compression. For unsampled coefficients and the coefficients of distributed video coding coefficient bands, the low density parity check accumulate encoder is used to calculate the parity bits, which are stored in the buffer and transmitted in small amount upon decoder request. At the decoder side, the optical flow method is used to generate the initial side information, and the initial side information is improved according to the sampled coefficients by using the coefficient matrix improvement model. The experimental results demonstrate that the proposed side information generation scheme based on the coefficient matrix improvement model can effectively improve the quality of side information, and the quality of the generated side information is improved by about 0.2–0.4 dB, thereby improving the overall performance of the distributed video coding system.     

An Efficient Labelling Approach to Harness Backbone and Side‐Chain Protons in 1H‐Detected Solid‐State NMR Spectroscopy

¹H‐detection can greatly improve spectral sensitivity in biological solid‐state NMR (ssNMR), thus allowing the study of larger and more complex proteins. However, the general requirement to perdeuterate proteins critically curtails the potential of ¹H‐detection by the loss of aliphatic side‐chain protons, which are important probes for protein structure and function. Introduced herein is a labelling scheme for ¹H‐detected ssNMR, and it gives high quality spectra for both side‐chain and backbone protons, and allows quantitative assignments and aids in probing interresidual contacts. Excellent ¹H resolution in membrane proteins is obtained, the topology and dynamics of an ion channel were studied. This labelling scheme will open new avenues for the study of challenging proteins by ssNMR.     

Unusual electro-optical behaviour of the nematic polyacrylate

ABSTRACT

High sensitivity of liquid crystals to the electric field makes them highly demanded and widely used in different applications. Despite the large number of the electro-optical research on the low-molar-mass liquid crystals electro-optics of the liquid crystalline (LC) polymers is much less studied. Herein, the comparative electro-optical behaviour of two nematic comb-shaped polyacrylates with phenylbenzoate mesogenic side groups was studied in detail. These two polyacrylates have completely the same structure of polymer backbone and spacer length but different in the direction of the ester group in the phenylbenzoate fragments. It was found that this difference predetermines their completely opposite electro-optical properties.

The influence of the electric field of different strength and frequency on the orientation of the mesogenic groups of these polymers is studied. It is shown that application of the electric field at temperatures above the glass transition temperature (~25°C) induces reorientation of the mesogenic groups along or perpendicular to the electric field direction depending in its turn on the ester group direction. For one of the polyacrylates an unusual textural transition is found; during cooling of the polymer sample under applied field at definite temperature a sharp change in the mesogen’s orientation from homeotropic to planar one is found. This electro-optical phenomenon is observed for the first time and probably associated with sharp change in sign of anisotropy of dielectric permittivity from positive (at high temperatures) to negative one (at lower temperatures). Kinetics of the electro-optical switching at different temperatures, influence of the molar masses of the polymer and frequency of the applied AC field on electro-optical behaviour of the polymers are studied. The possibility of the fixation of the electroinduced homeotropic alignment of the mesogenic groups by photopolymerisation of the diacrylate dissolved in the polymer is demonstrated.     

Side chain liquid crystalline composites,occurrence of interdigitated bilayer smectic C phases

We report on the results of X-ray investigations in two series of polymer monomer composites, PM6Rm-33 and PMnR12-33, which consist of mixtures of achiral liquid crystalline side chain polymers and their monomers. These mixtures present a unique integration of monomer in the polymeric base which assists in modifying their properties and forming homogenous composites. X-ray measurements for all the investigated composites indicate the existence of bilayered smectic C phases (SmC₂). In several composites, the interlayer distance of the SmC₂ phase abnormally increases with cooling; this is associated with the aliphatic interdigitation at the tail-to-tail interface being more prominent when longer aliphatic tails are present.     

Photooptical Properties of Polymethacrylates Having Cyanoazobenzene‐Containing Side Groups with Lateral Methyl Substituents and Different Spacer Length

New photochromic polymethacrylates with different spacer length having azobenzene side groups and lateral methyl substituents were synthesized. The phase behavior of polymethacrylates and their photooptical properties were studied and compared with unsubstituted analogues. It is shown that an introduction of lateral methyl substituents results in almost complete suppression of liquid crystalline (LC) phase formation and strong decrease of photoinduced dichroism values. It is found that rates of the photoinduced E‐Z isomerization and back thermal Z‐E isomerization are almost independent on spacer lengths. Due to the presence of lateral substituents, the photoinduced azobenzene Z‐form shows remarkable long lifetime, and back thermal conversion at room temperature takes more than 10 days. Specific peculiarities of the photoorientation process in polymer films under the polarized UV and visible light action were studied and their mechanism is suggested. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1337–1342     

Criss‐cross amphiphilic polymers and analogous model systems

A new class of amphiphilic polymers carrying two pendant docosyl (C22) chains, located at periodic intervals that are separated by PEG chains of varying lengths, was synthesized via a simple melt‐transesterification polymerization, using dimethyl, 2,5‐didocosyloxyterephthalate as one of the monomers. DSC, variable temperature FT‐IR, and WAXS studies demonstrated that immiscibility between the pendant docosyl units and the backbone PEG segments drives their self‐segregation; this results in the crystallization of the pendant docosyl segments and the generation of a lamellar morphology with the alkyl segments and the PEG chains occupying alternate layers. Based on the study of model criss‐cross amphiphiles that resemble the polymer repeat unit, it is postulated that the chains reconfigure such that both the docosyl chains fold to one side of the terephthalate unit while the PEG segments form a loop on the other side; these chains then organize in a bilayer to form the lamellar structure. The simplicity of the synthesis and the rather unique properties of these polymers suggests that such a design could be translated to develop other interesting functional materials that could exploit the immiscibility‐driven microphase separation for the generation of sub‐10 nm domains; these could have potential applications, such as in membranes, solid polymer electrolyte formulations, and so forth. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1554–1563     

Side chain length affects backbone dynamics in poly(3‐alkylthiophene)s

Charge transport in conjugated polymers may be governed not only by the static microstructure but also fluctuations of backbone segments. Using molecular dynamics simulations, we predict the role of side chains in the backbone dynamics for regiorandom poly(3‐alkylthiophene‐2,5‐diyl)s (P3ATs). We show that the backbone of poly(3‐dodecylthiophene‐2‐5‐diyl) (P3DDT) moves faster than that of poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) as a result of the faster motion of the longer side chains. To verify our predictions, we investigated the structures and dynamics of regiorandom P3ATs with neutron scattering and solid state NMR. Measurements of spin‐lattice relaxations (T₁) using NMR support our prediction of faster motion for side chain atoms that are farther away from the backbone. Using small‐angle neutron scattering (SANS), we confirmed that regiorandom P3ATs are amorphous at about 300 K, although microphase separation between the side chains and backbones is apparent. Furthermore, quasi‐elastic neutron scattering (QENS) reveals that thiophene backbone motion is enhanced as the side chain length increases from hexyl to dodecyl. The faster motion of longer side chains leads to faster backbone dynamics, which in turn may affect charge transport for conjugated polymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1193–1202     

Effect of Side Chains and Sulfonic Groups on the Performance of Polycarboxylate-Type Superplasticizers in Concentrated Cement Suspensions

Polycarboxylate-type superplasticizers (PCs) containing different side chains and sulfonic groups have been synthesized, and the effect of side chains and sulfonic groups on their performance in cementitious systems has been intensively investigated by measuring zeta potential, thickness of absorption layer, paste fluidity, rheological properties as well as the setting time in this paper. Results show that the PC containing both short poly(ethylene oxide) (PEO) side chains and long PEO side chains with the molar ratio of 1:1 has a better dispersibility than the PC containing only short PEO side chains or only long PEO side chains in cement suspensions. The shorter the side chain of the PC, the longer the setting time of cement paste incorporating it. An appropriate increase of sulfonic group content is beneficial for the improvement of dispersibility for the PC and leads to no obvious change for the setting time. It also suggests that there is a geometrical balance between the PEO side chains and sulfonic groups for the performance of PC. This work is not only helpful for understanding the relationship of molecular structure of PCs and their performance, but also further designing optimum molecular structure of PC to meet the requirement in different concrete system.